Fundamentals of Mechanical Technology

Code

Start Date

2023-02-12

End Date

2023-02-16

City

Dubai

Price

3450 $

Language

Participants

1-15

Hotel

click here

Provide us with your details and the team will contact you

Send to a friend

Please fill in all the fields below and a link will be sent to your e-mail when you click it. You will be redirected to the download page

Full Name

Mobile Number

E-mail

Please fill in all the fields below and a link will be sent to your email when it is clicked

Full Name

Mobile Number

E-mail

INTRODUCTION

Chemical engineering is at the heart of much of the chemical, oil, gas, and petrochemical industries. The chemical engineer is interested in the transportation and transformation of solids, liquids and gases, but must also be familiar with many of the other engineering disciplines including mechanical, electrical and instrumentation. Of specific importance are separation processes including distillation, heat transfer, hydraulics and fluid flow, reaction engineering, but also process control and economics. These are the fundamental principles of chemical engineering.

This programme considers the areas of chemical engineering that are most commonly encountered, and will provide an understanding of the fundamentals to the non-specialist, and a refresher to practising engineers, with examples that will be drawn from a range of process industries including oil and gas processing, petrochemicals, chemical manufacturing .

In this programme you will:

Learn to interpret flowsheets and process flow diagrams
Develop and understand mass and energy balances in process design
Learn about fluid flow, pumps and compressors, and mixing
Discuss heat transfer equipment and their design, including heat exchangers
Understand distillation and separations used in oil and gas processing
Discuss effluent minimisation and treatment
Learn how to control processes
Perform a basic economic analysis of a project
Understand the safety and environmental responsibility on process engineers

PROGRAMME OBJECTIVES

Using case studies from the oil, gas and chemical industry to illustrate the material, participants attending the programme will:

Learn to interpret flowsheets and process flow diagrams
Understand the use of mass and energy balances in process design
Gain a basic understanding of fluid flow, including pumping and mixing
Study examples relevant to the oil and gas industry
Design a heat exchanger and know advantages/disadvantages of different types
Understand distillation and separations used in oil and gas processing
Appreciate the need to control environmental pollution from industry
Learn how to control processes
Perform a basic economic analysis of a project

TRAINING METHODOLOGY

In addition to formal lectures. videos and discussions, the participants will learn by active participation through the use of problem-solving exercises, group discussions and analysis of real-life case studies.

PROGRAMME SUMMARY

This programme identifies the areas of chemical engineering that are most commonly encountered and are fundamental to its understanding, enhancing process design and operation and enabling fruitful dialogue between the non-specialist and the engineer. Programme examples will be drawn from a range of process industries including the oil and gas processing, petrochemicals and chemical manufacturing industries.

PROGRAMME OUTLINE

Process Engineering Fundamentals

Introduction
Basic Concepts to remember
Flow diagrams
Piping and Instrumentation Diagrams (P&IDs)
Process equipment
Introduction to mass and energy balances
Batch vs Continuous
Risk Assessments and Hazard Studies
Flammability and Electrical Area Classification
Workshop Session

Fluid Flow

Pressure and Head
Bernoulli’s Theorem
Flow of Liquids
Reynolds number, pressure drop in pipes
Compressible flow
Introduction to Thermodynamics
Two-phase and Multi-phase Flow
Principle of process relief devices and process design of relief systems
Pumps and Compressors
Mixing and Mixers
Workshop Session

Heat Transfer

Thermal conductivity
Conduction and convection
Insulation
Heat transfer coefficients
Heat exchangers, type and sizing
Chemical reactions
Reaction kinetics
Introduction to catalysis and Green Chemistry
Workshop session

Introduction To Separation Processes

Distillation basics
Phase behaviour and vapour/liquid equilibria
Distillation Equipment
Distillation Troubleshooting
Gas/Liquid separation
Absorption and adsorption
Solid Liquid separation
Air and water pollution control
Effluent treatment
Workshop Session

Process Control & Economics Basics

Measured variables
Simple feedback control
SIS and SIL
Process Utilities
Air
Water and cooling water
Steam
Electricity and power generation
Process Economics
Preliminary economic analysis
Fixed and variable costs, break even
Calculating raw materials usage
Scale up and six tenths rule
Estimating the cost of process equipment and plants

The European Quality Training and Management Consultancy adopts modern methods of training and raising the efficiency of human resources development, so we follow:

Theoretical lectures through PowerPoint presentations and Visual presentations (videos and short films).
Scientific evaluation for the trainee (pre & post-evaluation).
Brainstorming, application and representation of roles.
Practical situations that are appropriate to the scientific material and with the nature of the work of trainees.
Tests at the end of the course.
The participant receives the scientific and practical material for the training program printed and saved on CD or Flash Memory.
Attendance reports for participants and final results reports with general evaluation of the program.
The scientific material of the training program is prepared in a scientific and professional manner, this is done by the best professors and trainers in all fields and all specialties.
At the end of the program, the trainee will receive a certificate of professional attendance, signed and certified by the European Quality Center for Training and Consulting.
Opening hours from 09.00 am to 02.00 pm, the program includes a snack buffet during the lectures.
Daily buffet food throughout the days of the training program, with a closing lunch on the last day of the training program for the distribution of certificates and commemorative photographs to the attendees
The terms and conditions for registration, payment and cancellation apply to all training programs. To see the conditions, please visit the following link, click here and your registration in any training program means your acceptance of the terms and conditions for registration, payment and cancellation
The terms and conditions of the training programs venue apply to all programs, and your registration in any training program means your acceptance of these terms and conditions
All prices on the site do not include the 5% VAT

Registration policy

European Quality Training and Management Consultancy rejects any registration application from any client without a recommendation letter addressed to European Quality Training and Management Consultancy by human resources department or training department of the applicant's employer.
To register for any training program, the deadline is before the training program start by 21 days, and any application after this date is rejected, except for who are accepted according to European Quality Training and Management Consultancy terms and conditions.
European Quality Training and Management Consultancy has the right to accept or reject any registration application without explaining any reasons.
The deadline for registration in any training program is 14 days before the start of the program and no registration is accepted after that, except for those who are approved according to the terms and conditions of the European Quality Training and Management Consultancy or with official approval and confirmation of registration issued by the European Quality Center for Training and Management Consulting
European Quality Training and Management Consultancy does not adopt the policy of the minimum number of participants in the training program if it is not stated explicitly in the terms of the program contract between the trainee or his work and between the European Quality Training and Management Consultancy of training and consulting
European Quality Training and Management Consultancy has the right to change, modify, or update this policy without prior notice, and the client has to review our policy before registering for any training program.
By registering for any of our training programs, you agree to our policy.

Price and payment policy

All prices shown on European Quality Training and Management Consultancy website are for joining training programs, excluding (hotel bookings for trainees - flight tickets - transportation - travel insurance - and any other special needs of travelers).
The training programs prices shown on European Quality Training and Management Consultancy include only (attending the program, practical and scientific material, coffee breaks, and a certificate after completing the training program.)
If the registration is personal by the client, then he has to pay the training program fees before the starting date by 21 days, via bank transfer to European Quality Training and Management Consultancy account.
If the registration is under an official letter issued by the trainee's employer, then the employer is responsible for paying the training program fees and European Quality Training and Management Consultancy has the right to claim the program fees before its starting date.
The trainee's employer is obliged to send the fees to European Quality Training and Management Consultancy account within a period of 90 days at maximum, from the program ending date.
European Quality Training and Management Consultancy has the right to change, modify, or update this policy without prior notice, and the client has to review our policy before making any deal.
By registering for any of our training programs, you agree to our policy.

Cancellation policy

The client do not has the right to cancel his reregistration before the starting date by less than 21 days. If the client cannot attend the training program for any reason, he can attend another training program at any other time, and he shall not be entitled to claim to European Quality Training and Management Consultancy any money or compensation in any way.
European Quality Training and Management Consultancy is entitled to cancel the registration of any participant in any training program without explaining the reasons, in accordance with European Quality trends and policy.
European Quality Training and Management Consultancy is entitled to confirm the registration according to its status and provide seats according their general policy.
European Quality Training and Management Consultancy is entitled to cancel any training program and is committed to refund all fees paid by the clients.
European Quality Training and Management Consultancy is entitled to change the training program venue as required without explaining any reasons, and they are not committed to refund any paid fees if the client cannot attend the program or the new venue is not suitable for the trainee's employer because of an emergent change of the venue, and the paid fees are saved in the client's account and can be used for registration for other training programs at another time.
European Quality Training and Management Consultancy has the right to change, modify, or update this policy without prior notice, and the client has to review our policy before asking for cancelation.
By registering for any of our training programs, you agree to our policy.

Discount policy

The European Quality Training and Management Consultancy offers special prices on some training programs for groups to participate in the programs (more than three participants in the program) starting from 20% and up to 40% of the basic price of the program and the discount rate is approved according to a technical and financial offer addressed to the trainee's work, showing details The program, the date of the meeting and the discount rate. When the price is approved after the discount, the new price of the program will be clarified on the website. It is available to all customers who wish to take advantage of the new price and participate in the activities of the training program
that you register in any program The acceptance of the policy of discounts applied to the European Quality Training and Management Consultancy Center Training & Management Consulting

This website is copyrighted in accordance with international laws. So it is not permitted to copy or reproduce this website, its contents, or any part of it, or save it automatically or transfer it in any way, both electronic or non-electronic. Infringement of these rights will subject you to legal accountability

Other Dates for the Courses

Engineering , Instrumentation & Mechanical Engineering

Courses Category

Most Read

The Proposed Courses

Fundamentals of Mechanical Technology

Registration policy

Price and payment policy

Cancellation policy

Discount policy

Other Dates for the Courses

Category

Other links

Search in site

Mailing List

Cities

Contact us