ID 414
Mechanical & Electrical Engineering Training Courses
Electrical Faults: Causes, Analysis, Detection & Remedies
Dubai
Hotel Name
click here
19 Jan 2025 : 23 Jan 2025
25 Hours
3450 USD
We apologize for any inconvenience you may experience while using the website as it is currently undergoing updates.
ID 414
Mechanical & Electrical Engineering Training Courses
Electrical Faults: Causes, Analysis, Detection & Remedies
Dubai
Hotel Name
click here
19 Jan 2025 : 23 Jan 2025
25 Hours
3450 USD
Training Details
Why Choose this Course?
This course teaches practical electrical troubleshooting and is concerned with the calculation of fault currents in electrical power systems. Short-circuit currents are associated with large amounts of very destructive energy and therefore calculations must be made to ensure that the short-circuit ratings of equipment are adequate to cater for these high currents. Accurate assessment of these currents is also essential for determining the settings of the system protection devices.
This course includes the preparation of the system for analysis, by manual calculation and by the use of computer analysis. Participants will be introduced to the various fault analysis software programs.
This course will feature:
What are the Goals?
By the end of this course, participants will be able to:
Who is this Course for?
This course will benefit all levels of personnel in an electrical installation. It will enable them to identify the causes and apply analysis of electrical faults in a power system.
This course is suitable to a wide range of technical professionals but will greatly benefit:
How will this be Presented?
This course will utilise a variety of proven adult training techniques to ensure maximum understanding, comprehension and retention of the information presented. This includes presentation and discussion of case studies (with appropriate solutions), latest videos, technologies, and various commercial fault current analysis software.
Questions are encouraged throughout, particularly at the daily wrap up sessions. This provides opportunities for participants to discuss with the Presenter specific issues and, if possible, find appropriate solutions. Specific goals of each participant will be discussed to ensure that their needs are fulfilled whenever practicable.
The Course Content
Day One
Introduction to fault analysis
Day Two
Three-phase short-circuit currents
Day Three
Unsymmetrical fault conditions
Day Four
Representation of unsymmetrical faults in power systems
Day Five
Computer based calculation of faults
Day 1 - Asset Cost Management Introduction
Maintenance & Reliability Best Practices are critical for every successful individual and company. This workshop delivers many practical and new Maintenance and Reliability Best Practices concepts and tools. You will discuss these concepts and practice using practical tools in case studies and discussion groups. The costs associated with equipment downtime and reduced production can be significant. Learning how to effectively manage all aspects of your industrial facility is a must.This workshop is a combination of instructor lead topic areas and class discussions. Interactive discussions will allow you to hear and learn best in class applications relating to maintenance planning and cost management strategies. You will have the opportunity to ask lots of questions in order to consider how best to apply these tools and techniques in your organization.
Day 2 - Laying the Groundwork
Maintenance & Reliability Best Practices are critical for every successful individual and company. This workshop delivers many practical and new Maintenance and Reliability Best Practices concepts and tools. You will discuss these concepts and practice using practical tools in case studies and discussion groups. The costs associated with equipment downtime and reduced production can be significant. Learning how to effectively manage all aspects of your industrial facility is a must.This workshop is a combination of instructor lead topic areas and class discussions. Interactive discussions will allow you to hear and learn best in class applications relating to maintenance planning and cost management strategies. You will have the opportunity to ask lots of questions in order to consider how best to apply these tools and techniques in your organization.
Day 3 - Applying the Value based Process
Maintenance & Reliability Best Practices are critical for every successful individual and company. This workshop delivers many practical and new Maintenance and Reliability Best Practices concepts and tools. You will discuss these concepts and practice using practical tools in case studies and discussion groups. The costs associated with equipment downtime and reduced production can be significant. Learning how to effectively manage all aspects of your industrial facility is a must.This workshop is a combination of instructor lead topic areas and class discussions. Interactive discussions will allow you to hear and learn best in class applications relating to maintenance planning and cost management strategies. You will have the opportunity to ask lots of questions in order to consider how best to apply these tools and techniques in your organization.
Day 4 - Ensuring the Continuity of the Value-based Process
Maintenance & Reliability Best Practices are critical for every successful individual and company. This workshop delivers many practical and new Maintenance and Reliability Best Practices concepts and tools. You will discuss these concepts and practice using practical tools in case studies and discussion groups. The costs associated with equipment downtime and reduced production can be significant. Learning how to effectively manage all aspects of your industrial facility is a must.This workshop is a combination of instructor lead topic areas and class discussions. Interactive discussions will allow you to hear and learn best in class applications relating to maintenance planning and cost management strategies. You will have the opportunity to ask lots of questions in order to consider how best to apply these tools and techniques in your organization.
The European Quality of Training and Management Consulting relies on advanced methodology in developing skills and enhancing the effectiveness of human resources. The company adopts modern methods to achieve these goals. In order to achieve its objectives, European Quality follows the following steps in a precise and professional manner:
Lectures and Visual Presentations:
Theoretical lectures are presented through PowerPoint presentations, videos, and short films, providing a comprehensive and enjoyable learning experience.
Scientific Assessment:
Trainees are thoroughly assessed before and after the training program to ensure the desired objectives are achieved and to provide necessary guidance.
Brainstorming and Role-playing:
Innovation and problem-solving are encouraged through brainstorming sessions and role playing experiences.
Practical Cases:
Practical learning is emphasized through cases relevant to the subject matter and the nature of work for the trainees, contributing to the development of practical skills.
Final Evaluation and Certificates:
A comprehensive assessment is conducted at the end of the program. Trainees are awarded attendance and participation certificates recognized by the European Quality for Training and Administrative Consultations, provided they have completed at least 80% of the program days.
Training Materials:
Professional trainers and experts in various fields create scientific and practical training materials, which are printed and retained, and distributed on CD or flash drives to ensure easy access to the content.
Post-Training Follow-up:
European Quality for Training and Administrative Consultations provides continuous support after the training program. This support includes additional consultancy sessions or workshops to ensure the continuity of learning and the application of acquired skills in the working environment.
Customized Training Programs:
Training programs are designed to meet the needs of individual companies and institutions. Client needs are carefully analyzed to ensure that the training content aligns with their specific objectives and achieves the desired impact.
Utilizing Technology:
Training incorporates modern techniques such as online platforms and distance learning to provide flexible and effective learning experiences. Participants can access educational resources online and engage in discussions and online workshops.
Specialized Trainers:
Trainers and lecturers are carefully selected to ensure they have high expertise in their fields. Experience and professionalism are added to the training to ensure the delivery of high-quality content and effective learning experiences.
Encouraging Participation:
European Quality encourages active participation and interaction during training sessions. Interactive activities such as group discussions and collective exercises are organized to stimulate effective participation in the learning process.
Focus on Personal Transformation:
Participants are encouraged to think critically and develop problem-solving skills and decision making abilities. They are guided towards achieving personal and professional transformation, leading to improved performance in their work areas.
Continuous Assessment:
Continuous assessments are provided to evaluate participants performance and their understanding of the training materials. This assessment is used to modify the training program if necessary and ensure the desired results are achieved.
Terms and Conditions:
Terms and conditions apply to all training programs. It is assumed that registering for any training program implies the participants agreement to these terms, including registration, payment, and cancellation policies.
Prices and Discounts:
It is noted that the prices displayed on the website do not include a 5% value added tax. All prices are subject to discounts according to the companys policies.
European Quality of Training and Management Consulting reserves the right to change the location of the training program, change the accredited lecturers for program delivery, hold, or cancel the program in line with the companys vision and program conditions and our quality policy.
European Quality for Training and Consultancy is certified
ISO 9001-2015
All rights reserved
Course Options
Marrakech
Dublin
Athens
Salalah
California
Washington
Milan
Berlin
Dubai
CopenhagenDubai
Beirut
Los Angeles
Doha
SingaporeDubai
Sydney
London
Kuala Lumpur
Riyadh
Cairo
Cape TownDubai
Madrid
Kuwait
Beijing
AmmanDubai
Jakarta
Jeddah
Sharm El Sheikh
AmsterdamDubai
Casablanca
Paris
Geneva
Vienna
Zurich
MunichDubai
Istanbul
Alkhobar
Toronto
Manama
StockholmDubai
Boston
Barcelona
Cyprus (Larnaka)
Roma
San Francisco
PragueAthens
TbilisiDublinWashingtonDubaiCaliforniaRiyadhCairoKuala LumpurLondonDubaiMadridKuwaitBeijingAmmanJakartaDubaiJeddahSharm El SheikhAmsterdamStockholm
Hong Kong
At European Quality Training and Management Consultancy, we provide high-quality training and consultancy services to develop future leaders. With a team of skilled experts, we tailor programs to meet the needs of public and private sectors, grounded in quality, ethics, and social responsibility. Our client-focused approach ensures professionalism and sustainable outcomes.
European Quality Training and Management Consultancy
REG NO : 13785/2018
VAT NO : 100528683400003
Recieve Our News
Subscribe now to our mailing list and keep up to date with our offers and news.
Contact Us
00971563356098 - 00971566356223
info@europeanqualitytc.com || europeanqualitytc@hotmail.com
U.A.E
Payment Methods
